Technology | Product Categories | Product Categories | Min. Diameter of Laser Vias | Max. Lamination Times | Max. Layer Counts | Copper Filling for Laser Vias |
Laser Via |
![]() |
Anylayer | 0.075mm | 6~7 | 14~16 layers | Y |
Laser Via |
![]() |
VOP (Via On Capping) |
0.075mm | 6+N+6 | 20~26 layers | Y |
Laser Via |
![]() |
Skip Via | 0.2mm | 6~7 | 20~26 layers | N |
Technologies | Product Categories | Product Categories | Min. Diameter of Through Via | Diameter of Back Drill Holes | Max. Board Depth | Spacing between Back Drill Holes |
Back drill |
![]() |
Back drill | 0.25mm |
0.35 - 0.45mm 0.45 - 0.80mm 0.80 - 6.00mm |
4.85mm 4.85mm 4.85mm |
Min 0.2mm |
Technology | Product Categories | Product Categories | Bending material | Min. Flex Thickness | Max. Layer Counts | Max. Flex Layer Counts | Bending angle |
Flex-Rigid |
![]() |
Flex-Rigid (Flex in the Middle) |
Polyimide | 0.075mm | 26 layers | 6 layers | 360° |
Flex-Rigid |
![]() |
Flex-Rigid (Flex on the external) |
Polyimide | 0.075mm | 26 layers | 4 layers | Max 180° |
Flex-Rigid |
|
Regal | FR4 + Coverlay(Polyimide) | 0.075mm | 26 layers | 4 layers | Max 180° |
Flex-Rigid |
![]() |
Semi-Flex |
FR4 + Flexible solder mask |
Min. residual thickness: 0.25mm | 26 layers | 4 layers |
Max 180°(Flex layer≤2) Max 90°(Flex layer>2) |
Technology | Product Categories | Product Categories | Drilling Categories | Material Categories |
High frequency and high speed |
![]() |
Hybrid lamination | Mechanical drilling | Modified FR4 / PPE / PPO / Hydrocarbon / PTFE + Normal FR4 |
High frequency and high speed |
![]() |
HDI | Laser drilling + mechanical drilling | Modified FR4 / PPE / PPO |
High frequency and high speed |
![]() |
High Layer Count (26~30L) |
Mechanical drilling | Modified FR4 / PPE / PPO |
High frequency and high speed |
![]() |
Flex-Rigid | Laser drilling + mechanical drilling | Modified FR4 / PPE / PPO + Polyimide |
Technology | Product Categories | Product Categories | Max. Copper Thickness of Inner Layers | Max. Copper Thickness of Outer Layers | Max. Board Thickness | Feature |
Heavy Copper |
![]() |
Heavy Copper | 8 OZ | 10 OZ | 4.0mm | Applied for components with high thermal dissipation demands. |
Technology | Product Categories | Product Categories | Drilling type | Description | Features |
Cavity |
![]() |
Embossed table design | Laser drilling + mechanical drilling | Embossed tables in the middle of board. | Getting more space for assembling, and lesser loss of signal transmission . |
Cavity |
![]() |
Gold fingers in cavity area | Laser drilling + mechanical drilling | Gold fingers in cavity area / electro-plating gold fingers / gold finger beveling . | Match standard connectors' specification, and more multiple functions in other areas . |
Cavity |
![]() |
BGA in cavity area | Laser drilling + mechanical drilling | BGA in cavity area | Getting more space for assembling, and lesser loss of signal transmission. |
Cavity |
![]() |
Cavity area build with CO2 laser drilling | Laser drilling + mechanical drilling | Cavity (without copper / with copper) in the middle of wire bonding areas . | Getting more space for assembling. |
Technology | Product Categories | Product Categories | Min. Copper coin size | Max. Copper coin size | Min. Copper coin thickness | Max. Copper coin thickness |
Copper Inlay |
![]() |
Copper coin throughout the board | 3.0*3.0mm | 80*80mm | 1.0mm | 3.0mm |
Copper Inlay |
![]() |
Copper coin embedded in the board
(Laser via drilled on the surface of copper Inlay )
|
3.0*3.0mm | 80*80mm | 1.0mm | 2.8mm |